K-FLEX IN CLAD JACKETING
- font size decrease font size increase font size
K-FLEX IN CLAD JACKETING
K-FLEX IN CLAD special polymer cladding is suitable and well recognised solution for Oil&Gas, Industrial, Petrochemical and Marine applications. The clever and easy to install solution suitable to protect thermal insulation material (MMF, PU, Cellular glass, FEF, etc.) in order to offer: Water and Vapour tight, Oil and grease resistance, reduces the risk for CUI, UV stability, Marine salt water resistance and Mechanical resistance. K-FLEX IN CLAD special polymer jacketing, thermoformable that reduce installation time and keep maintenance costs low.
JACKETING |
|
Colour |
Dimensions |
Black - Gray - Beige* |
1 x 25m - 1 x 50m - 1 x 175m |
* Customized colours available on demand for M.O.Q. orders. |
IN CLAD SYSTEM with K-FLEX ST |
|||||
Material |
Flexible polymeric barrier |
||||
Color |
Grey and Black |
||||
Thickness |
1.2±0.2 mm |
||||
MAX Surface Temperature |
80°C (176°F) |
||||
MAX application temperature, IN CLAD System |
105°C (221°F) |
IN CLAD with K-FLEX ST IN CLAD with K-FLEX ECO (Short time) |
|||
MIN application temperature for IN CLAD System |
-200°C (-328°F) |
IN CLAD System with K-FLEX ST |
|||
Water Vapour Permeability Moisture Resistance Factor (covering) |
μ > 90.000 |
EN12086 |
|||
Density |
1700 kg/m3 (+/- 10%) |
||||
Tensile Strength |
>=6,9 Mpa |
ISO 37 (Typical value 7.5 Mpa) |
|||
Elongation to break |
>100% |
ISO 37 (Typical values: elongation at 70%, |
|||
Elastic Modulus
|
>=60 MPa |
ISO 37 (Typical value 70 Mpa)
|
|||
Modulus 10%
|
>1.5 MPa |
ISO 37 | |||
Peel adhesion |
>50 Kpa |
ISO 2411 |
|||
Shear strength |
>20 N/25mm |
ISO 34-1 |
|||
Hardness |
>=80 ShA |
ISO 7619, ASTM D2240 |
|||
UV Resistance
|
Extremely good |
2 years of exposure in New River, |
|||
Salt Spray resistance |
Extremely good |
ISO 3768 / ASTM B 117-73, 480 hours. |
|||
Ozone resistance |
Extremely good |
ASTM D1171 72h 50ppmh 20%, no oxidation |
|||
Resistance to aging |
Extremely good |
ISO 4982, after 360h, 72MJ, |
|||
Resistance to oil |
Extremely good |
ISO 1817; after 72h immersion in oil IRM 903, |
|||
Impact resistance |
Extremely good |
EN12691; 1 Kg, 20mm, 600m |
|||
Health aspects |
Dust and fiber free |
||||
Spread of flame |
Pass |
BS 476 pt 7 |
|||
Spread of flame |
Pass |
NF 92501 |
|||
Fire propagation |
Pass |
BS 476 pt 6 |
|||
Fire requirements for shipbuilding |
Pass |
IMO 61/67 part 2&5 |
|||
Approvals and Supervisions |
CE Marine Mark Approved (MED, module B) |
||||
OTHER PROPERTIES: |
|||||
The product is compliant to the requirements of Norsok standard R-004 ed 3 (par. 5.9 non metallic jacketing) |
|||||
L’ISOLANTE K-FLEX reserves the right to change data and technical requirements without notice. |